home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The CICA Windows Explosion!
/
The CICA Windows Explosion! - Disc 1.iso
/
desktop
/
wwpls145.zip
/
README.TXT
< prev
next >
Wrap
Text File
|
1995-03-21
|
32KB
|
718 lines
NOTE: THIS PROGRAM REQUIRES VBRUN300.DLL, NOT NECESSARILY
INCLUDED WITH IT. SEE SECTION III BELOW FOR DETAILS.
WWPlus
Windows Wallpaper Manager/Changer/Editor - screen saver.
Print this file for program instructions.
If you are upgrading from an earlier version, see HISTORY.TXT
for features that have been added or changed.
See the file FORMATS.TXT for information on the graphics
formats recognized by WWPlus and the pros and cons of
using them as Windows wallpaper.
⌐1992-1995 All rights reserved
By Don Bradner
Arcata Pet
600 F Street
Arcata, CA 95521
Compuserve address: 76130,1007
America OnLine: DBirdMan
Internet: dbirdman@redshift.com
Contents of this file:
I. Program Description
II. Program Requirements
III. Installing WWPlus
IV. Getting Started
V. Files that make up WWPlus
VI. Troubleshooting
VII. UnInstalling WWPlus
VIII. Obtaining wallpaper images
IX. Getting future upgrades
X. Registration and distribution
I. PROGRAM DESCRIPTION.
WWPlus is a program for organizing and displaying Windows 3.1
wallpaper files. With this program you can easily maintain a
collection of wallpapers, automatically change them at an
interval you select, and use image formats (GIF, PCX, TGA, TIF,
.ICO and .JPG) that would otherwise be unusable by Windows as
wallpaper. GIF and PCX provide compression of 256-color images,
and .JPG provides compression for 16-million color images, thus
saving disk space.
There is a screen saver module that will turn your wallpaper
files into a screen saver after a period of inactivity.
Extensive setup options, including password protection, are
available both from the Windows Control Panel Desktop icon and
from the main WWPlus screen.
WWPlus has editing features and file conversion routines built
in, which allow you to change images to suit your wallpaper
needs. You can crop, resize, stretch, rotate, mirror, flip,
sharpen, soften, and adjust brightness, contrast and gamma.
Wallpapers may be tiled (small images displayed in multiples to
fill the entire screen) or not, individually determined. Each
non-tiled wallpaper may be precisely positioned anywhere on the
screen, not just centered (the Windows default). Non-tiled
images may be resized on-the-fly to full screen or a user-set
dimension.
Multiple sets of wallpapers called "queues" may be built, with
easy changing of queues. A wallpaper may appear in more than
one queue. Some program configuration items are maintained
with the queue, others are "Global." Queues may be specified
as command line options, and the .QUE extension may be
associated with WWPlus to allow the program to start by running
the queue from File Manager or Program Manager icons.
All of the images installed in a wallpaper queue may be displayed
simultaneously in "thumbnail form" for easy maintenance. A
single image selection my be previewed on the main screen
before deciding to edit it or make it the current wallpaper.
Changing interval may be as short as 6 seconds (0.1 minutes)
for "slideshow" effect, or as long as 999.9 minutes.
If an active application is maximized (shown full screen), the
program timer will be suspended so as to avoid annoying screen
jumps when the wallpaper changes.
When adding files there is a "preview" option in the dialog
box. If you do not recognize a file name, you may use this
option to view a thumbnail of the image before choosing to load
it.
There is an additional option to have the icon "disappear" when
the program is running. If you select this option and then
need to access the program to make changes, open the group
where you have installed WWPlus and double-click the icon.
Instead of starting another copy of the program, the running
version will be restored.
Full documentation is included in the form of a Windows Help
file. When you desire help, press your F1 function key for
context-sensitive help, or press the help key if you are in a
file dialog box.
WWPlus contains functions which can read and right the .GIF
format, which contains compression technology covered by U.S.
Patent No. 4,558,302, owned by the Unisys corporation. The
author of WWPlus has obtained a license from Unisys, and pays a
royalty on each registration, to use this technology. The
following statement is required by that license:
"Use of this software is permitted only to the extent
reasonably required to determine whether to purchase
the software.
"After payment is made, use of this software is limited
to use on only a single personal computer or
workstation which is not used as a server. An
additional payment is required for each use on
another personal computer or workstation.
"Only a single copy may be made of this software
solely for backup or archival purposes. The software
may also be transferred to a single hard disk.
"Any use of this software in violation of the above is
not licensed.
"For information concerning licensing the LZW
compression and/or decompression capability, please
contact:
Unisys Corporation
Welch Licensing Department - CISW19
Township Line & Union Meeting Roads
P.O. Box 500
Blue Bell, Pennsylvania 19424"
Users active in the online world may be aware that there has
been considerable debate among shareware authors as to whether
to continue to support .GIF with the royalty requirements,
which became known as of 1/1/95. The author of WWPlus feels
that it is in the best interest of the users of this program to
continue to support that format so long as it is the dominant
8-bit color format. Future decisions will be made with some
reliance on user feedback. Please feel free to communicate
with the author on this topic.
II. Program requirements.
WWPlus requires an IBM compatible 386 or better, running
Windows 3.1, with at least 4 megs of RAM and VGA or better
graphics. Manipulating large images may require 8 megs or more
of memory, and more is always better. A monitor and video card
capable of 256 colors is recommended for viewing of
photographic images. If your monitor/card setup is capable of
true color (16 million colors), WWPlus will handle files
with that color depth. Generally, such cards will perform best
at 32,000 or 65,000 colors rather than 16 million, and it is
unlikely that any quality will be lost.
Some operations require a mouse.
Graphics files can be quite large, particularly with true-color,
so a large hard disk is recommended. WWPlus will require
about 1 meg for installation.
III. Installing WWPlus
If you obtained WWPlus by downloading it from a computer
Bulletin Board (BBS) or another online source, one necessary
file may not have been included. You will need a file called
VBRUN300.DLL, which is almost always available from any source
that would have WWPlus. On BBS systems the file will
usually be called VBRUN300.ZIP or VBRUN3.ZIP. If you obtained
the program on disk, the file should be included and may be
called VBRUN300.DL_. If it is missing, contact the supplier of
the program. Registered versions obtained from the author
should always include VBRUN300. If you are installing VBRUN300
separately, it MUST be put in the \Windows\System directory.
To install WWPlus, insert the disk in your computer and
choose File/Run from the Program Manager. Enter A:Setup or
B:Setup as appropriate and follow the prompts.
If you downloaded WWPlus, you probably have the files in a
download or temporary directory. Change the directions above
to provide a path to the setup, such as D:\temp\setup.
At the end of the setup operation you will be given the option
of adding WWPlus to your Startup Group. Doing so will cause
the program to start whenever you start a Windows session.
This is the recommended procedure; you can always delete the
icon from the group at a later time if you wish.
NOTE: Setup will not run if any other program is using
VBRUN300.DLL or any other library file used by the program,
including other versions of WWPlus. An error message will be
generated, and you must end all such applications before
retrying the installation. You may restart these programs
after installation is completed - they will share the VBRUN
module without problem.
To be safe, it is best to have only Windows running before
installing WWPlus or any other program. Keep this in mind for
the future, particularly if you have WWPlus running as a hidden
Icon - you should end the program before installing other
software.
IV. Getting Started.
You will need one or more wallpaper images to use with the
program. These files may be located in any directory on any
drive, but management will be simplified if you place them all
in one directory. A directory named WALLPAPR is recommended,
either as a root directory on your C: drive or a subdirectory
under the \WWPlus directory.
Windows comes with a few wallpapers in .BMP format. If you do
not have any other images, you can make some simple drawings
with Windows Paintbrush and save them as either .BMP or .PCX
files. For further information on obtaining images see section
VII below.
Double-click the WWPlus icon to start the program. The first
time that the program starts it will be a full program window.
Once you have one or more wallpapers installed, the program
will start as an icon, which you may double-click at any time
to show the main window. If you have chosen the hidden icon
option, the program will not be visible when started. Simply
start it a second time; the first instance will become visible
and the second will end itself.
Take a moment to familiarize yourself with the program elements
on screen. If you press the F1 key, a help file will be
displayed, and you may graphically choose different program
elements to see an explanation of their function.
When you move your mouse pointer across the toolbar icons and
some other screen elements a small "smart caption" will appear
to give you a better idea about what the icon does. You may
turn these captions off when you no longer need them, via the
Preferences menu.
Now click the Add button (or choose Add from the Wallpaper
menu). Use the dialog box to browse for images in any of the
supported formats. If you do not know from a file name what
the image looks like, click the preview button and you will see
a small representation of the image. The size of and number of
colors in the image will be shown below the image.
When you have a desired image, click OK. The path and filename
will appear in the Wallpaper Queue. Click once on the listing
to "select" it. Now click the "Make Current Wallpaper" button
to view the image as a wallpaper. If it displays as you would
wish, go on to add additional wallpapers. If you would like to
change the way the image is displayed, you have many options to
choose from, a few of which are explained next.
1. Positioning. If the image is not a full screen image you
may want to change the place where it appears on your screen.
Select the image in the Wallpaper Queue, and then click the
position icon. You may now move the image around by dragging
it with your mouse. Place the mouse cursor over the image
and press the left button down. Holding the button down,
move the mouse and the image will move with it.
When the image is where you wish, release the button. Now you
may set the position by either pressing the Enter key or
double-clicking the image. If you want to abort the
positioning, press the ESCape key. The coordinates of the
upper left corner of the image will show in the X and Y
boxes at the bottom right of the program screen (you may
directly alter them if you wish). From now on whenever the
image is displayed it will be in the set position.
2. Tiling. If a wallpaper image is small, you may wish to
"tile" it. This will make the image appear many times to fill
the screen. You may adjust the position of the first image in
the same manner described above; all other images will orient
to the first. To make an image tile, select it in the
Wallpaper Queue and click the "Tiling" icon. Tiling may be
turned off in the same way. The position of the tiled image
will also be influenced by the X and Y coordinates: The
first image will follow the setting, and all other copies
of the image will orient to the first.
3. Displaying wallpapers as full screen. Non-tiled wallpapers
may be displayed full-screen, or at a pre-set size. Larger
images will be reduced, and smaller images will be enlarged.
The images proportions (aspect ratio of width to height) may
be left intact, or the image may be stretched to fill the
entire screen or selected size. Choose "Resize Wallpaper"
in the preferences menu to invoke this option.
4. Altering the image. You may perform a variety of editing
functions on an image by selecting it in the Wallpaper Queue
and then clicking the "Edit" button. The first time you do
this, press the F1 key when the editor is visible and browse
through the help file for explanations of the editing functions.
When you have a few images installed, set the timer to an
appropriate interval and turn it on (if it is not already on).
Once you have everything the way you want it, minimize the
program window (click the down arrow at the upper right of the
program window) and leave it running as an icon. If you are
not expecting to make changes immediately, you may wish to make
the icon disappear by selecting that option before you minimize
it. Remember that you can always get the program back by
opening the group where it is installed and double-clicking the
icon.
Preferences: There are some items which you can set to affect
the way the program operates. These are found as a Preferences
submenu under the Wallpaper menu. The first is "Change
Wallpaper at Startup." If this is not checked, the wallpaper
will be whatever was displayed prior to the program startup.
The second is "Remove Wallpaper at Exit," which will make your
next Windows session start faster. Next is "Special
'Multipurpose' Icon." If this menu item is checked the
minimized program icon will be replaced with a miniature
4-button icon that can be used to perform several functions.
This form will initially appear at the bottom right of the
screen, but will "remember" any change in its location which
you may choose to make. Double-Click the icon's control box to
restore the main program window. This option has no meaning if
the hidden icon option described above is in use.
The fourth preference is "Resize Wallpaper," explained above.
Fifth is "Screen Saver Setup," which will display a dialog for
that function's setup and allow testing. Next is "Display
Order," with the choices being Random or Sequential. The
seventh is "Default Origin," which is where WWPlus will
position your wallpapers unless they are individually specified.
The eigth is "Smart Captions," which sets your preference for
text boxes to identify the icons. The final preference is
"Monitor Com Ports." Because a wallpaper change would likely
disrupt a data transfer by modem, you may choose to have WWPlus
monitor a com port to which the modem is connected. When
WWPlus detects that the port is opened the timer is disabled.
Choose ports 1 through 4, or None. The default is None. If
you choose a port that has a serial device other than an modem
attached, such as a printer, you may get unpredictable results.
V. FILES THAT MAKE UP WWPLUS.
The program files are compressed prior to setup. They are
listed here with their compressed and uncompressed names. The
setup program only copies a file to your disk if it does not
find the file already or if this file is newer.
References to the WWPlus directory refer to the directory
selected at installation; default is C:\WWPLUS
Compressed File Name Type and where installed
WWPLUS.EX_ WWPLUS.EXE Program, WWPlus directory
WWPSAVER.EX_ WWPSAVER.EXE Screen Saver Program Ditto
WWPSAVR.SC_ WWPSAVR.SCR Screen Saver Bootstrap Windows directory
WWPLUS.HL_ WWPLUS.HLP Help file WWPlus directory
SETUPWWP.EX_ SETUPWWP.EXE WWPlus Setup Windows directory
-- SETUP.EXE Setup Program, not transferred
-- SETUP.LST Used by Setup
IMK.DL_ IMK.DLL Library File, Windows\System directory
JPEGIO.DL_ JPEGIO.DLL Ditto
KNIFE.VB_ KNIFE.VBX Ditto
SETUPKIT.DL_ SETUPKIT.DLL Ditto
VER.DL_ VER.DLL Ditto
WWPLIBR.VB_ WWPLIBR.VBX Ditto
-- WWP_REG.KEY Registration key, WWPlus directory
***Note: WWP_REG.KEY included only with registered versions.
-- README.TXT This file WWPlus directory
HISTORY.TX_ HISTORY.TXT version history ditto
FORMATS.TX_ FORMATS.TXT explanation of graphics formats ditto
SCANNING.WR_ SCANNING.WRI details on scanning service ditto
-- FILE_ID.DIZ program description for BBS use
-- VENDOR.DOC program description for shareware vendors
VBRUN300.DL_ VBRUN300.DLL Library File, Windows\System directory
***note: VBRUN300.DLL may not be included if the program was
obtained from an online source. It will have to be obtained to
run the program and the setup program. From on-line sources,
it is usually VBRUN300.ZIP or VBRUN3.ZIP. If the program was
obtained on disk then the file should be included; if not,
contact the source of the disk. If the file is obtained
separately, it must be installed in your Windows\System
directory BEFORE you run setup.
If the program is obtained on disk there may be images
included, usually in an \images directory. These are not
installed by the program. There may be a Rights.TXT file with
the images to establish their usage rights.
FILES CREATED BY WWPLUS:
The following are generally located in your WWPLUS directory:
*.QUE These data files hold lists of the images that you
have selected as wallpapers, as well as some of your program
settings.
WWPLUS.BMP This is a "temporary" file that WWPlus uses
to translate non-standard images so that they can be used by
Windows. It is destroyed and recreated each time the wallpaper
changes unless the new image is a .BMP file.
*.TIF This is a multiple image file that is used to speed
the display of thumbnail images. The name will correspond to
the queue name.
WWPlus also creates some other temporary files with .TMP
extensions, as well as a WWPLTEMP.TIF file. Under normal use,
the program will clean these up when it exits. If the program
crashes, it will clean them up the next time it is run and then
exited normally.
FILES ALTERED BY WWPLUS:
CONTROL.INI WWPlus will add a section called
[ScreenSaver.WWPSaver]. Global parameters for both the program
and the screen saver module are stored here.
VI. Troubleshooting.
If you receive a message which says something like "Unable to
install VBRUN300.DL_" during the program install, it means that
you have a version of WWPlus that originally included the
VBRUN file but it is not present. You can solve this two ways:
copy VBRUN300.DLL to the directory where the rest of the
distribution files are and rename it VBRUN300.DL_, or else use
a text editor (such as Windows Notepad) to edit the file
SETUP.LST. Remove the listing for VBRUN300.DL_ and save the
file. The VBRUN file will still have to be located in your
Windows\System directory, but the setup won't try to reinstall
it.
If WWPlus has been working fine, but suddenly will not load,
the queue file may have become corrupted. Try starting WWPlus
from the command line with a new queue selected (one that
doesn't already exist). Choose Run from the Program Manager
file menu, and type C:\WWPLUS\WWPLUS.EXE C:\WWPLUS\TEST1.QUE
(if your wwplus directory has a different name, use that
instead, and if the test1.que exists, use a different name).
If the program starts, try changing the queue to the one you
were using before. If it crashes at that point, the best
solution is to delete that queue completely.
A related problem can occur if a file has become corrupted and
the Change Wallpaper at Startup preference is selected. If
that is the next file to be used, WWPlus may crash when trying
to load a corrupt wallpaper. The cure would be the same as
shown above.
USERS THAT ROUTINELY CHANGE DISPLAY COLOR-DEPTHS SHOULD PAY
PARTICULAR ATTENTION TO THE FOLLOWING ITEM:
If you are using a display of more than 256 colors, and you
have a wallpaper loaded that is true color (16 million colors),
if you then change display drivers to a 256-color driver,
Windows will hang during its load. If this happens, you should
run setup from the DOS prompt within your Windows directory,
change to a 16 color driver or a true color driver, and reload
Windows. Clear the wallpaper and then proceed to change to the
256 color driver. You can also simply wait it out, which could
be many minutes. Windows will eventually usually load.
If you are using the Thumbnail option to look at all of your
installed files, and it does not appear to show them all in
proper order, then the thumbnail file has become corrupted.
Simply choose the "Build new display" option from the File menu
on the thumbnail screen.
If you have an image that WWPlus will not display, it may be in
a format that cannot be used. There are some variations of
.GIF and .PCX that are known to make problems for WWPlus.
There are many non-standard versions of JPEG that will cause
problems. If you can load them into another image editing
program you may be able to save it in a usable format. It is
possible for some corrupted JPEG files to crash WWPlus
completely, and WWPlus will sometimes crash with grayscale JPEG
files as well.
If WWPlus runs correctly, but will not read .GIF or .JPG files,
you may have a version of Image/Knife installed on your system
that does not support these formats. An example is the version
of Knife that comes with Borland's Visual Solution Pack. Since
that file has a date newer than the one supplied with WWPlus,
the WWPlus SETUP program will "respect" the newer version and
not write over it. Solution: expand the two files IMK.DL_ and
KNIFE.VB_ that come with WWPlus to IMK.DLL and KNIFE.VBX, and
copy them to your WWPLUS directory. If you want to use the
development versions that remain in your Windows/System
directory you will need to exit WWPlus first.
WWPlus expects image file names to match their formats.
If you have a .BMP image but give it a .GIF name, the program
will not be able to read it.
Speed vs compression: Compressed files will take noticeably
longer to load than uncompressed (.BMP). .GIF files provide
the greatest amount of compression, and take the longest to
change. .PCX files provide moderate compression with faster
change. During the change, there will be a short few seconds
when the computer will "hang" and you must wait for the
completion. If you are working on something critical, you may
wish to turn off the timer so that the wallpaper will not
change. Alternatively, Maximize the program that you are
working on, and the WWPlus timer will be suspended until
the program is reduced to less than full screen size.
Note for users of compressed disk programs (Stacker, DOS 6
DoubleSpace, etc): There is no space advantage to using
compressed file formats with compressed drives (other than JPEG
- see the FORMATS.TXT file). You will lose the speed without
gaining space, since your compression program cannot further
compress a .GIF file. Use .BMP in this case.
If you have chosen a wallpaper file with more colors than your
display can show there will be significant delay while the
program changes the color depth. If you intend to use the
image regularly you should edit the image to lower the color
depth to match your display.
VII. Uninstalling WWPlus
The following information is provided if you would like to
remove WWPlus from your computer.
If you have used WWPlus as a screen saver, the first thing to do
is to change your Windows screen saver to another program or to
"None." Open the Windows Control Panel in your Main Group, and
open the Desktop item. Look at the Screen Saver Name. If
WWPlus is the screen saver it will say "WWPSAVR." Use the
drop-down selection to pick another screen saver or (none).
Close the dialog.
Most of the files used by WWPlus are located in your WWPlus
directory. This will be C:\WWPLUS unless you chose another
directory during installation. Delete this directory using
File Manager. In your Windows directory will be a file named
WWPSAVR.SCR, which is the screen saver startup. Delete it.
In your Windows\System directory, delete WWPLIBR.VBX. Two
other files are installed to this directory: IMK.DLL and
KNIFE.VBX. These are files that may possibly be used by other
programs. If you delete them, make backup copies first so that
they can be reinstalled if another program complains about
their absence.
Make a backup copy of the file CONTROL.INI in your Windows
directory. Open CONTROL.INI in NOTEPAD or another text-only
editor. Look for a section called [ScreenSaver.WWPSaver],
which contains the global variables for WWPlus. Delete the
entire section and save the file.
Delete your WWPlus program group. If WWPlus is set to start
when you run Windows, open the Startup Group and delete the
WWPlus icon. Make sure that you have selected "Save Settings
on Exit" in the Options menu, and close Windows. WWPlus is now
removed.
VIII. Obtaining wallpaper images.
Any image that can be displayed on your computer may be used as
wallpaper. If you regularly use Computer BBS systems or online
sources such as Compuserve, Genie, America Online, etc. you
will find a wealth of images that can be downloaded. These
images are usually in the .GIF format to reduce download time.
If you obtained this program on disk, there may be images
included, usually in an \images directory. A RIGHTS.TXT file
may be included in this directory describing the user's rights
to the images included.
The author is maintaining a small collection of his scans of
his own photos and those of users where permission has been
granted. It is available by FTP from
redshift.com/arcatpet/wwplus/images
Files are in JPEG format.
You may use Windows Paintbrush to create images, or other
similar programs.
By far the greatest enjoyment of WWPlus will come if you
can use photographs that you own or have taken. If you do not
have access to a scanner, there are a number of services which
offer scanning, including one run by the author of WWPlus. For
details, including a free scan offer for registrants of the
program, see the file "SCANNING.WRI."
IX. Getting future Upgrades.
When you register WWPlus with the author, you will receive a
copy of the latest version and a registration key that removes
the startup screen. That key file will work with future
versions of the program, so no upgrade fee will be required.
Current versions of WWPlus can always be found on Compuserve in
several forums, including WINAV, GRAPHSUP, PHOTOFORUM and
EDRIVE. Current versions are also posted to America OnLine.
Use the keyword "Windows" and search the software library for
"WWPlus." At this writing the program is found in Top Picks.
The author is endeavoring to maintain a personal FTP site on
the internet. Address at this writing is
redshift.com/arcatpet/wwplus/wwpxxx.zip where xxx is the
version number. If you find this address to be inaccurate in
the future, E-Mail the author dbirdman@redshift.com or
dbirdman@aol.com for a current address.
Current versions are also uploaded to two internet archival
sites, CICA and SimTel. Addresses respectively are
ftp://ftp.cica.indiana.edu/pub/pc/win3/desktop and
ftp://oak.oakland.edu/SimTel/win3/desktop. These two sites
have many mirror sites worldwide as well.
Registered users who do not have online access may get a disk
copy from the author for a fee of $5 ($7 non-US). Send a short
note indicating your registered status and requesting the
latest copy. Please use the same name under which you are
registered.
X. Registration and Distribution.
WWPlus is shareware. Free use is extended to any user for a
reasonable evaluation period; typical idea of "reasonable" is
30 days. If use is continued, the program should be registered
with the author. Registration fee is $20. California
registrants please add $1.45 sales tax, and foreign registrants
should include $1.00 for airmail shipping. All funds should be
drawn on a US Dollar account. A convenient form for
registration is included below and in the Help file (and may be
printed from there). Until you register, there will be a
startup screen asking you to register which you will have to
respond to. When you register, this annoyance will go away.
Otherwise, this version is complete and un-crippled in any way.
As a registration incentive, the author will provide on request
two free scanned images from your original prints or slides,
when sent with the registration. See the file "SCANNING.WRI"
for details.
Commercial use: WWPlus may be used commercially, as long
as there is a registered copy for each computer/terminal that
is using it. The author is willing to discuss customization of
the program for commercial/large scale application, including
use as presentation software.
You may freely distribute WWPlus as long as no fees are
charged for the program, and all necessary files are included.
If you are a registered user, do not distribute the file
WWP_REG.KEY, which identifies you as the user (This
identification shows up in the "About" box).
The author is very interested in feedback from users. Please
feel free to make contact at the address shown at the beginning
of this file with any comments/questions/problems.
WWPlus version 1.45
Registration Form
Thank you for registering. There are several registration
methods available:
With a credit card you may order by FAX: (707) 822-6570
or Phone: (707) 822-6350 10-6 PST, ask for Don.
By mail, with check, credit card, or money order in US Dollars
To: Don Bradner
Arcata Pet
600 F Street
Arcata, CA 95521-6301
Compuserve members may register on-line: GO SWREG, program
registration number is 2213.
Registration price is US$20.00, including postage within the US.
Number of registrations desired_______x 20.00 = $____________
California residents add $1.45/registration sales tax________
Non-US add $1.00 per registration for air mail ____________
Total $____________
Software will be sent on 1.44 meg 3-1/2 inch disk.
Registrants Name: __________________________________________
Mailing Address: __________________________________________
City/State/Zip/Country:_________________________________________
Phone number ( )________________E-Mail, if any______________
If paying with a credit card:
Card type: _VISA _MasterCard _AMEX _Discover
Card Number: _______________________________Exp Date: _________
Signature to authorize charge: _______________________________
(Optional) Where did you get WWPlus 1.45?
__BBS or on-line service Which one?___________________________
__Software/Shareware service Which one?________________________
__Shareware CD-ROM Which one?_________________________________
__Internet What Site?_______________________________________
__Friend
__Other ____________________________________
The author would be happy to hear your comments about WWPlus,
or your ideas for changes or improvements.